PULSAR Paddle Level Switch

Pulsarpoint 300 is a rotating paddle level switch for level measurement and switching on bulk solids. The paddle's rotation is interrupted when material reaches the paddle, causing a clutch to disengage the motor. This in turn actuates a relay allowing an alarm signal to be switched. This may be used to signify a material level as being high, intermediate or low depending on configuration chosen. The Pulsarpoint 300 utilises a polycarbonate housing, sealed to IP66. The process connection is of the same material, with a polypropylene double blade paddle as standard which can be easily converted to a single blade.

Features:
Cable and rigid extension options
High temperature +350ºC/+662ºF option
ATEX dust Ex ia Zone 20/21 option

Applications:
Solids point level measurement
Switching on bulk solids
Block chute detection
Industries such as food and beverage, animal feed, pharmaceutical, chemical, plastics, quarrying, power generation and cement
Monitoring materials such as plaster, cement, chalk, lime, granules, wood chips, cereals, cocoa, sugar, animal feeds, washing powders or plastics powders and pellets

Pulsarpoint 310 is a rotating paddle level switch for level measurement and switching on bulk solids. The paddle's rotation is interrupted when material reaches the paddle, causing a clutch to disengage the motor. This in turn actuates a relay allowing an alarm signal to be switched. This may be used to signify a material level as being high, intermediate or low depending on configuration chosen. The Pulsarpoint 310 has a diecast aluminium housing sealed to IP66, with process connection in aluminium, or stainless steel. Various paddle materials are available along with options on seals for aggressive media applications. The Pulsarpoint 310 level switch is available for high application temperatures of up to +600ºC. It is also available with ATEX dust approval for Zone 20, 21 and 22.

Options:
Switches are available with solids or cable extension, allowing a wide range of alarm points to be catered for with materials to suit the application, as well as high temperature versions for applications up to +350ºC/+662ºF, such as is required in electrostatic precipitator hopper level measurement.

Applications:
Solids point level measurement
Dust level measurement
Switching on bulk solids
Block chute detection
Industries such as food and beverage, animal feed, pharmaceutical, chemical, plastics, quarrying, power generation and cement Monitoring materials such as plaster, cement, chalk, lime, granules, wood chips, cereals, cocoa, sugar, animal feeds, washing powders or plastics powders and pellets