PULSAR Float type level switch
Float Switches: 800 Series
The Pulsarpoint 800 range of liquid level float switches and accessories offer the user a
wide selection of high integrity devices, designed for very reliable operation when
controlling the level of non-potable water and sewage. Versions are available to
provide alarm control and pump control. The units have all been designed for
maximum durability and dependability, and are manufactured to the highest standards.
Mechanically activated designs are available. Withunits capable of switching operating currents from
5 to 13 Amps, pump up or pump down.The 800 series pump control switches have a wide
angle operation to enable user adjustable pumping ranges from one pump switch.
The 800 series alarm control switches have narrow angle operation to provide precise switch on and off
points to activate pump control panels and alarms.The floats are manufactured from high impact and corrosion
resistant PVC or polypropylene and are suitable for liquid temperatures up to 60ºC
A specially designed seal bonds the cable into the float, preventing water ingress, whilst allowing
flexibility and ensuring reliable operation.Pulsarpoint 800 series float switches
have typical working life of over ½ million operations.
Pipe clamp and cable weighted versions are available, as well as Single
Pole Double Throw outputs for pump up or pump down operations from one switch.
Features
• High quality, high reliability, low cost
• Up to 13 Amp current switching (specials available)
• Adjustable pumping range
• High quality cable entry seal to floats
• Pump up, pump down or SPDT operation
• Resistant to turbulence or rotation
• Mounting straps and cable weights choice
• Standard with 3m or 10m leads, (longer lengths are available on request)
• Single pole double throw (SPDT) Can carry out both the low or high
level alarm functions.Has 3 core cable.
.
-
PULSAR Float switch 800-20 Pump Master – Pump Switch
A versatile, mechanically activated wide angle pump switch, not sensitive to turbulence. Controls pump control panels or control pumps directly up to 1.35kW at 115V AC and 2.59kW at 230V AC. Maximum continuous current 13 Amps, maximum starting current 85 Amps. Pump up and pump down or SPDT versions. Available with cable weight option.
The float is 7.73cm dia x 9cm and is manufactured from PVC. Adjustable pumping range from 18cm to 91cm. -
PULSAR Float switch Micro Master 800-50 - Pump Switch
A low cost mechanically activated pump switch designed for use in turbulent conditions. Controls pumps up to10 Amps at 115V AC, 8 Amps at 230V AC. Pump up, pump down or SPDT versions.The float is 7cm dia x 12.3cm and is manufactured from high impact resistant polypropylene. -
PULSAR Float switch 800-60 Sensor Float – Control Switch
A mercury activated, narrow angle control switch designed to accurately activate pump control panels and alarms. There is a smaller version for operation in confined spaces. Switches currents of up to 5 Amps AC. Switch operating range typically ±1cm (±0.39in) from horizontal. Pump up, pump down or SPDT versions areavailable with the pipe clamp, integral weight (not SPDT) or cable options. The float is 8.6cm dia x 11.6cm (3.39in dia x 4.57in) and is manufactured from PVC. -
PULSAR Float switch 800-70 Signal Master – Control Switch
A high performance, mechanically activated narrow angle control switch designed to accurately activate pump control panels and alarms. Switches currents of up to 5 Amps AC.
Switch operating range typically ±4cm from horizontal. Pump up, pump down or SPDT versions are all available with pipe clamp or cable weight options. The float is 7.2cm dia x 8.7cm and is manufactured from high impact resistant polypropylene housing.
This narrow-angle sensing device is used to accurately monitor liquid levels in:
• Potable water
• Water
• Sewage applications
The Pulsar Signal Master SPDT can be wired to work in either normally open or normally closed applications. Itis not sensitive to rotation.
