SmartMeasurment - Turbine Flowmeter

Turbine Flowmeter - Series ALTM HM

ALTM Turbine Flow Meters
ALTM turbine flow meters (hereinafter referred to as turbines) are used for the precise measurement of instantaneous flow of low-viscosity
fluids rates and flow quantities such as; tap and demineralised water, fuels, liquefied gases, Light fuel oil, solvents, Pharmaceutical fluids,
etc. Turbine Flowmeters measure volumetric flow, where flow passing through the tube is measured by the mean velocity of the streaming
fluid. Flow rectifiers ensure a laminar flow in the axial direction of the wheel. A light-weight turbine wheel carried concentrically in the tube
body is rotated by the fluid. The RPM of the turbine wheel is directly proportional to the mean flow velocity within the tube diameter and
corresponds to the volume flow over a wide range.

ALVTM Display with Frequency and Analog Output
The ALVTM is a programmable local display with integral carrier-frequency pickup and amplifier for Alia turbine meters. Flow rate is
indicated in an 8 digit LCD display with 14 segments. A 10 point linearization is included to optimize the accuracy. The pulse output
provides a flow-proportional frequency signal or scaled volume pulse in accordance with programming. For electrical connection a 6-pin
plug or a junction box with 6 internal terminals is provided

FEATURES
- Fast response time and high resolution within 5 to 50 msec
- Wide temperature range from -273 up to +350°C
- Pressures up to 630 bars and up to 4,000 bar (using high-pressure adapters or flanges)
- Easily cleaned and designed to flushed particulates through the turbine with the medium
- For food applications with dairy connections as per DIN 11851
- For Pharmaceutical fluids with Tri-Clamp« connections
- For very low flows designed with sapphire bearings
- Factory calibrated